Digi TX40 User Manual page 778

Applications
1. Write your Python application code. Code can include:
n Any Python 3.6 standard feature.
n Access to the TX40 configuration and hardware with the
n Third-party modules included in the TX40, for example:
pySerial 3.4
l
Eclipse Paho MQTT Python Client
l
n Any other third-party module implemented in Python.
2. Install the application in /etc/config/scripts directory.
3. Launch your application:
n Run your application at the shell
n Configure your application to run
PyCharm FAQ: My TX40 is not listed in Digi Device Selector
If an TX40 does not appear on the list of the Digi Device Selector:
n Ensure that your device has the mDNS service enabled and is on the same network as the
computer. See
n Or click the link Click here to add it manually to specify the IP address, port, username, and
password.
TX40 User Guide
prompt.
Set up the TX40 for Python
Develop Python applications
Python
automatically.
development.
modules.
778