Nemo - Digi TX40 User Manual

Virtual Private Networks (VPN)
n automatic: Uses a pre-shared key to generate association key information, which is
periodically rotated through using 802.1x.
n manual: Uses connectivity association key information that is manually entered.
7. If you specified the manual security mode, enter the connectivity association key and key
name.
a. Specify the connectivity association key:
(config vpn macsec tunnel1) association cak value
(config
where value is the association key. The key format is 16 hex digits.
b. Specify the connectivity association key name:
(config vpn macsec tunnel1) association ckn value
(config
where value is the association key name. The key format is 32 hex digits.
8. Save the configuration and apply the change
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

NEMO

Network Mobility (NEMO) is a mobile networking technology that provides access to one or more
Local Area Networks (LANs) on your device. NEMO creates a tunnel between the home agent on the
mobile private network and the TX40 device, isolating the connection from internet traffic and
advertising the IP subnets of the LANs for remote access and device management.
Dynamic Mobile Network Routing (DMNR) is the implementation of NEMO for Verizon Wireless Private
Networks. DMNRsupport requires the use of Verizon SIM cards that have DMNRenabled.
TX40 User Guide
vpn macsec tunnel1)>
vpn macsec tunnel1)>
NEMO
613