Configure Scripts To Run Manually; Task One: Upload The Application - Digi TX40 User Manual

Applications
user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
3. Use the python command to run the Python application. In the following example, the Python
application, test.py, takes 3 parameters: 120, ports and storage:
# python /etc/config/scripts/test.py 120 ports storage

Configure scripts to run manually

You can configure an scripts to be manually run.
Required configuration items
n Upload or create the script.
n Enable the script.
n Set the script to run manually.
Additional configuration items
A label used to identify the script.
n
The arguments for the script.
n
Whether to write the script output and errors to the system log.
n
The memory available to be used by the script.
n
Whether the script should run one time only.
n

Task one: Upload the application


Web
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the menu, click System. Under Administration, click File System.
The File System page appears.
TX40 User Guide
Configure scripts to run manually
826