Table of Contents
Advertisement
Interfaces
The IPv4 Maximum Transmission Unit (MTU) of the LAN.
l
When to use DNS: always, never, or only when this interface is the primary default route.
l
IPv4 DHCP server configuration. See
l
n
IPv6 configuration:
The type being the way to control how the modem in the Digi device obtains an IP address
l
from the cellular network.
The metric for IPv6 routes associated with the LAN.
l
The relative weight for IPv6 routes associated with the LAN.
l
The IPv6 management priority of the LAN. The active interface with the highest
l
management priority will have its address reported as the preferred contact address for
central management and direct device access.
The IPv6 Maximum Transmission Unit (MTU) of the LAN.
l
When to use DNS: always, never, or only when this interface is the primary default route.
l
The IPv6 prefix length and ID.
l
IPv6 DHCP server configuration. See
l
MACaddress denylist and allowlist.
n
To create a new LAN or edit an existing LAN:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
TX40 User Guide
DHCP servers
for more information.
DHCP servers
for more information.
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
168
Advertisement
Table of Contents
