Versasync Specifications; Supply Power - Safran VersaSync User Manual

1.7 VersaSync Specifications
Ethernet Data Cable
1.7

VersaSync Specifications

The specifications listed below apply to the current base model, during "normal"
operation, with VersaSync synchronized to valid Time and 1PPS input references.
1.7.1

Supply Power

Operating Power and Standby Power: 10 to 32 V
Power draw:
This product is not intended to operate above 32V
sient voltage spikes and surges above 32V require an external power con-
ditioner/power filter to ensure safe operation.
Backup Battery: VersaSync has an internal battery to support the Real Time
Clock. The battery is a small lithium coin cell that is not customer-replaceable.
This battery will keep approximate time and date in a shutdown state over ~135
days before requiring recharge. After full drain, the battery will require ~5 days to
fully recharge. Minimum battery life is ~30+ years.
18
Operating: 10 W typical
Standby: 0.4 W
DC
; power sources with tran-
DC
CHAPTER •
1 VersaSync User Manual Rev. 12