Monitoring Leds; System Status - Safran WR-Z16 User Manual

2.3 Monitoring LEDs
#
#2
#3
Fans
#4
#
2.3

Monitoring LEDs

The status of the WR-Z16 device can be quickly verified using the 3 visible LEDs
in the front-panel. The tables below detail the behavior of each LED depending
on the status of the WR-Z16.
The blinking behavior of the front panel LEDs is represented by the "Visual"
column in the following tables using a sequence of three consecutive instants.
2.3.1

System Status

This LED is mainly used to inform the state of the system itself (Daemons loaded,
Fans, power-supply, Temperature, CPU load, Available space, etc.). This led is
also used to identify the various stages and modes of the booting procedure.
Table 2-3:
●●●
10
Name
● Swappable & monitorable mod-
Power Sup-
ply #1
ule:
- 100- 240VAC, 50- 60Hz, (80W
Max)
● Swappable & monitorable mod-
Power Sup-
ply #2
ule:
- 100- 240VAC, 50- 60Hz, (80W
Max)
Fan #1 Swappable Fan module with rear & front
fans
- Default airflow: blowing out
Fan #2 Swappable Fan module with rear & front
fans
- Default airflow: blowing out
Status LED behavior
Visual Behavior
Steady Green
Information
Device system state is OK. There is no Warning or Crit-
ical alert.
CHAPTER
Ref.
"Product Specifications"
on page 13
Description
•
2 WR-Z16 User Manual Rev. v5.0