Reference Topology - Safran WR-Z16 User Manual

5.2.2

Reference topology

The following figure summarizes how devices can be configured with different
presets to operate on a generic timing network. To improve the com-
prehensibility of the reader, this reference topology has been separated in sev-
eral theoretical layers:
CHAPTER •
5 WR-Z16 User Manual Rev. v5.0
1 is the first source to be executed and 255 the last one.
If the source rank is set to 0, the port will not be included as a timing
source.
This parameter is not used when the port role is Master.
Figure 5-7: Port configuration (e.g., wr0) from CLI tool
Note: PTP modes on Custom preset: The Custom preset allows to
configure any desired interface as PTP master through Web and CLI.
However, PTP slave mode in ethernet ports can only be configured
through the CLI.
5.2 General Timing Management
65