Table of Contents
Advertisement
2.6 Connecting Network Cables
Figure 2-2:
Rear rack mount installation
2.6
Connecting Network Cables
SecureSync includes two BASE 10/100/1000 Ethernet ports (ETH0- RJ45, and ETH1-
SFP) for full NTP functionality, as well as a comprehensive web- based user interface
("Web UI") for configuration, monitoring and diagnostic support.
Before connecting the network cable(s), you need to decide which port(s) you want to use
for which purpose (e.g., ETH0 for configuration only, etc.), and how you want to configure
basic network connectivity e.g., the IP address:
SecureSync 2400 Getting Started Guide Rev. 4
23
Advertisement
Table of Contents
