Ntp Timing Source Configuration; Info/Overview - Safran WR-Z16 User Manual

5.6.1.3

NTP Timing Source Configuration

The configuration of an NTP timing source is divided in two parts. The first panel
provides the configuration shared by all the NTP timing sources:
3.7001.x
3.7001.2
3.7001.3
The second panel is a table where each column represents an NTP timing source:
3.70x0.x
3.70x0.0
5.6.2

Info/Overview

This panel provides an overview of the status for each NTP instance:
3.70x5.x
3.70x5.1
3.70x5.0
CHAPTER •
5 WR-Z16 User Manual Rev. v5.0
OID Name
ntp/cfg/xxx
Refresh
Rate
Retries
OID Name
ntp/x/cfg/xxx
IPv4 <String>
Server
Note:
NTP Passive Timing Source: Due to its poor performance NTP
timing sources are always forced to be "Passive Only". However,
adding them to the configuration will provide a more robust solution
as they can be used to cross-validate the active timing source.
OID Name
ntp/x/info/xxx
Server
Status
Offset
Value Type
Configuration on how to provides NTP
to 3rd party devices.
<Integer> Time lapse between NTP server queries (in
• Default: 30 seconds).
<Integer> Number of retries for NTP server queries per-
• Default: 5 formed at the initialization of the device.
Value
Type
Configuration of the x NTP timing source (x=
[1-5]).
IP or URL of the reference NTP server.
Value Type
Information of the x
source (x=[1-5]).
• Disabled NTP server status. Warns if the NTP server
• OK cannot be reached.
• NTP sync
error
• NTP stopped
replying
<Integer> Time offset between the device and the NTP
reference server (in seconds).
Description
.
Description
Description
th NTP timing
5.6 NTP
89