5.6.1.3
NTP Timing Source Configuration
The configuration of an NTP timing source is divided in two parts. The first panel
provides the configuration shared by all the NTP timing sources:
3.7001.x
3.7001.2
3.7001.3
The second panel is a table where each column represents an NTP timing source:
3.70x0.x
3.70x0.0
5.6.2
Info/Overview
This panel provides an overview of the status for each NTP instance:
3.70x5.x
3.70x5.1
3.70x5.0
CHAPTER
•
5
WR-ZEN Series User Manual Rev. v5.1
OID
Name
ntp/cfg/xxx
Refresh
Rate
Retries
OID
Name
ntp/x/cfg/xxx
IPv4
<String>
Server
Note:
NTP Passive Timing Source: Due to its poor performance NTP
timing sources are always forced to be "Passive Only". However,
adding them to the configuration will provide a more robust solution
as they can be used to cross-validate the active timing source.
OID
Name
ntp/x/info/xxx
Server
Status
Offset
Value Type
Configuration on how to provides NTP
to 3rd party devices.
<Integer>
Time lapse between NTP server queries (in
• Default: 30
seconds).
<Integer>
Number of retries for NTP server queries per-
• Default: 5
formed at the initialization of the device.
Value
Type
Configuration of the x NTP timing source (x=
[1-5]).
IP or URL of the reference NTP server.
Value Type
Information of the x
source (x=[1-5]).
• Disabled
NTP server status. Warns if the NTP server
• OK
cannot be reached.
• NTP sync
error
• NTP stopped
replying
<Integer>
Time offset between the device and the NTP
reference server (in seconds).
Description
.
Description
Description
NTP timing
th
5.6 NTP
103