Oki ES9160 Maintenance Manual page 416

Notes:
Perform adjustment for the folding position first because the stapling position must be adjusted
referring to the folding line.
Phenomenon
Folding position
Specified
folding position
Stacker hook
Fig.6-120
Specified
folding position
Folding position
Stacker hook
Fig.6-121
Stapling position
Folding position
Stacker hook
Fig.6-122
Folding position
Stapling position
Stacker hook
Fig.6-123
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
Contents
When the folding position is
deviates from the specified one
by more than -2.0 mm
When the folding position is
deviates from the specified one
by more than 2.0 mm
When the stapling position is
deviated from the specified one
more than -0.50 mm
When the stapling position is
deviated from the specified one
more than 0.50 mm
6 - 108
Adjustment
Increase the value of the folding
position adjustment in order to
move the folding stopping
position (the position of the
stapling hooks) of the stacker
upward.
P. 6-111 "[ 2 ] Folding position
adjustment"
Decrease the value of the folding
position adjustment in order to
move the folding stopping
position (the position of the
stapling hooks) of the stacker
downward.
P. 6-111 "[ 2 ] Folding position
adjustment"
Decrease the value of the
stapling position adjustment in
order to move the stapling
stopping position (the position of
the stapling hooks) of the stacker
downward.
P. 6-109 "[ 1 ] Saddle stapling
position adjustment"
Increase the value of the
stapling position adjustment in
order to move the stapling
stopping position (the position of
the stapling hooks) of the stacker
upward.
P. 6-109 "[ 1 ] Saddle stapling
position adjustment"
© 2012 OKI DATA CORPORATION All rights reserved