Advertisement
[ 6 ] File sharing related error
[2D10] System access abnormality
[2D32] File deletion failure
[2DA6] File deletion failure
[2DA7] Resource acquiring failure
Classification
File sharing related error
Check item
Setting
[2D11] Insufficient memory
Classification
File sharing related error
Check item
Setting
[2D12] Message reception error
[2D13] Message transmission error
Classification
File sharing related error
Check item
Setting
[2D14] Invalid parameter
[2D61] Invalid parameter
Classification
File sharing related error
Check item
Setting
© 2012 OKI DATA CORPORATION All rights reserved
System access abnormality
File deletion failure
Resource acquiring failure
•
Delete some files in the shared folder by using Explorer
because of automatic/manual file deletion failure (in case
of [2DA6])
•
Turn the power OFF and then back ON. Perform the job in
error again.
•
If the error still occurs, check that there is no job, and
format the HDD with [5] + [C] + [START].
Insufficient memory
•
When there are running jobs, perform the job in error
again after the completion of the running jobs.
•
If the error still occurs, turn the power OFF and then back
ON, and perform the job again.
Message reception error
Message transmission error
•
Turn the power OFF and then back ON. Perform the job in
error again.
Invalid parameter
•
When a template is used, form the template again.
•
If the error still occurs, turn the power OFF and then back
ON, and perform the job again.
8 - 211
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
8
Advertisement
