Advertisement
10. REMOTE SERVICE
There are following functions as Remote Service.
1. Auto Supply Order
Automatically orders the toner by FAX or E-mail.
2. Service Notification
Notifies the status of the equipment to the service technician by E-mail or FAX.
To start in the self-diagnosis mode, turn OFF the power using the main power switch, then turn ON the
power while two digital keys designated to each mode.
10.1 Auto Supply Order
10.1.1
Outline
Automatically orders the toner.
1. Placing an Order
There are two ways to place an order.
-
FAX
Installation of the FAX board is required.
If the FAX board has not been installed, it is regarded as OFF setting.
-
E-mail (E-mail body + TIFF image)
2. Order Intervals
When the toner empty occurs, the number of occurrences is counted. And when it reaches the
specified number for CONDITION, the order is placed automatically.
3. If Order Failure Occurs
If some problems occur and the order cannot be placed after registering an order as a job, refer to
the standard countermeasure for the FAX/E-mail transmission failure.
© 2012 OKI DATA CORPORATION All rights reserved
10 - 1
ES9160 MFP / ES9170 MFP
REMOTE SERVICE
10
Advertisement
