Advertisement
Notes:
•
The display of items on this screen varies depending on the types of data written on the USB media.
Each item is displayed only when each data file is written on the USB media in the following
conditions.
Item
1. SYSTEM FIRMWARE(OS Data)
2. SYSTEM SOFTWARE (HD Data)
•
If the USB media are not recognized properly, "USB device Not detected" message is displayed. In
this case, disconnect the USB media and connect again within 3 minutes, or shut down the
equipment and connect the device properly. Then repeat the procedure from (4).
•
If any of the error messages below is displayed, confirm if the data file in the USB media is correct.
Then repeat the procedure from (4).
Error
number
01
Error Loadmodule
02
Machine Model Get Error
03
Copy Data with valid signature in USB
Storage
04
Other models ROMDATA TXXXXXXXX
* The version name comes at
"xxxx.xxx.x".
05
Copy Signature File in USB Storage
06
Patch and Normal package in one folder
of USB Storage
(6)
Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item.
Item
1. SYSTEM FIRMWARE(OS Data)
YSTEM SOFTWARE (HD Data)
2. S
ES9160 MFP / ES9170 MFP
FIRMWARE UPDATING
T160SFPWxxxx.tar is written. (xxxx is version.)
T160HDPWxxxx.tar is written. (xxxx is version.)
Error message
Updating OS Data
Updating Master data
11 - 26
Condition
Cause
Module loading failed.
Model information was not
downloaded.
Checking of data file failed.
Master data of other model are
stored.
Data files are not stored in the USB
media.
When both the system and patch
update packages are in the USB
media
Remarks
© 2012 OKI DATA CORPORATION All rights reserved
Advertisement
