Advertisement
[G] Reset "FUNCTION" list
Reset the initial setting of the fax function by referring to the "function list" which has been printed out
following the procedure below.
P. 12-6 "[C] Print out "FUNCTION" list"
(1)
Press the [USER FUNCTIONS] button.
(2)
Press the [ADMIN] button, enter the password, and then press the [OK] button.
(3)
Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4)
Press the [INITIAL SETUP] button to set each item.
Notes:
Explain to the user (machine administrator) about the next operation and ask him/her to enter
his/her password.
[H] Check actuation of data encryption function setting
Check if the data encryption function is in operation.
•
Press the [COUNTER] button on the control panel. If a key-shaped icon is displayed at the top right
of the screen, the data encryption function is in operation.
12.2.4
Procedure for disabling data encryption function
The basic setting procedure is the same as the one for enabling this function.
Set the value of 08-9379 to "0" (Invalid) in the following procedure.
P. 12-7 "[D] Enable data encryption function"
12.2.5
Procedure for discarding HDD when data encryption function is
enabled
Set the data encryption function disabled following the procedure shown in
Procedure for disabling data encryption function" when perform the code 3C->6 : Erase HDD Securely
(HDD securely erasing) to completely erase the data in the HDD.
© 2012 OKI DATA CORPORATION All rights reserved
Fig.12-5
12 - 9
P. 12-9 "12.2.4
ES9160 MFP / ES9170 MFP
BACKUP FUNCTION
12
Advertisement
