Advertisement
When "2" is selected, the menu below appears.
To start, press the [START] button.
HDD Assist Mode
Current HDD type: ADI HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
=>
2. Remove key
When the operation is finished, the result appears on the menu.
HDD Assist Mode
Current HDD type: ADI HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
=>
2. Remove key
Data in the HDD has been erased.
Press SoftPower Key to Switch Off
Note:
After this operation, the equipment becomes reusable without reinstalling the firmware.
ES9160 MFP / ES9170 MFP
SELF-DIAGNOSIS MODES
System Firmware Version
Update Mode
Confirmation Screen
Are you sure ???
Press START to continue
Press STOP to cancel
Fig.5-12
System Firmware Version
Update Mode
Fig.5-13
5 - 22
: xxxx(x.x.x.x)
: 4c Mode
: xxxx(x.x.x.x)
: 4c Mode
© 2012 OKI DATA CORPORATION All rights reserved
Advertisement
