Oki ES9160 Maintenance Manual page 359

6.9 Adjustment of the Scanner Section
6.9.1 Carriages
[A] Installing carriage wires
When replacing the carriage wires, refer illustrations below:
[Front side]
Wire pulley
[Rear side]
Idler pulley
Adjustment of the carriage wire tension is not necessary since a certain tension is applied to the
carriage wires by the tension springs.
Notes:
Make sure the tension applied to the wire is normal.
© 2012 OKI DATA CORPORATION All rights reserved
Carriage-2
Carriage wire
Bracket for carriage-1
Hook
Tension spring
Fig.6-31
Carriage-2
Tension spring
Fig.6-32
6 - 51
Idler pulley
Carriage wire
Bracket for carriage-1
Hook
Wire pulle
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6