Advertisement
[D] Stapling position adjustment (front 1-point / "R" series size)
This adjustment is performed in the Adjustment Mode (05-4823-3) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
[E] Stapling position adjustment (center 2-point)
This adjustment is performed in the Adjustment Mode (05-4823-4) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
[F] Stapling position adjustment (2-point pitch)
This adjustment is performed in the Adjustment Mode (05-4823-5) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
6.15.5
Punching position center adjustment
This adjustment is performed in the Adjustment Mode (05-4824) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
6.15.6
Punch hole position adjustment
This adjustment is performed in the Adjustment Mode (05-4825) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
© 2012 OKI DATA CORPORATION All rights reserved
0.2mm
-5.0 mm to 1.0 mm
Increasing the value
The distance between the stapling position
and the edge of the paper becomes shorter.
Decreasing the value The distance between the stapling position
and the edge of the paper becomes longer.
0.2mm
-1.0 mm to 1.0 mm
Increasing the value
The stapling position moves farther to the front
side from the center position.
Decreasing the value The stapling position moves farther to the rear
side from the center position.
0.2mm
-3.0 mm to 2.4 mm
Increasing the value
The pitch between the stapling positions
becomes wider.
Decreasing the value The pitch between the stapling positions
becomes narrower.
0.2mm
-3.0 mm to 3.0 mm
Increasing the value
The punching position moves farther to the
front side from the center position.
Decreasing the value The punching position moves farther to the
rear side from the center position.
0.2mm
-4.0 mm to 1.0 mm
Increasing the value
The distance between the punch hole and the
trailing edge of the paper becomes shorter.
Decreasing the value The distance between the punch hole and the
trailing edge of the paper becomes longer.
6 - 85
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6
Advertisement
