Advertisement
Replacement part
Finisher control PC board
[CF10] Communication module SRAM reading failure
Classification
Finisher related service call
MJ-1101
Check Item
Main power switch
Setting of the equipment
Converter PC board
Finisher control PC board
Replacement part
Converter PC board
Finisher control PC board
MJ-1101 (When MJ-6103 is installed)
Check Item
Main power switch
Setting of the equipment
Converter PC board
Finisher control PC board
Hole punch control PC board
Replacement part
Converter PC board
Finisher control PC board
Hole punch control PC board
© 2012 OKI DATA CORPORATION All rights reserved
Communication module SRAM reading failure.
Turn OFF the main power switch, then back ON.
Check if the MJ-1101 is set as the specified finisher on the
equipment. (08-4548)
•
Check the connectors and harnesses between the converter
PC board and the finisher controller PC board.
•
Board check
Board check
Turn OFF the main power switch, then back ON.
Check if the MJ-1101 is set as the specified finisher on the
equipment. (08-4548)
•
Check the connectors and harnesses between the converter
PC board and the finisher controller PC board.
•
Board check
•
Check the connectors and harnesses between the hole
punch control PC board and the finisher control PC board.
•
Board check
Board check
8 - 175
Measure
Contents
Measure
Measure
Measure
Measure
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
8
Advertisement
