Oki ES9160 Maintenance Manual page 185

(12) Remove 2 screws. Take off 1 bearing and the
bracket.
(13) Take off 3 gears and 1 timing belt.
(14) Remove 1 E-ring, 1 pin and 1 pulley.
(15) Take off the guide roller on the rear side.
(16) Remove the seal on the front side. Remove 1
E-ring and 1 bushing.
© 2012 OKI DATA CORPORATION All rights reserved
Bearing
Bracket
Fig. 4-197
Timing belt
Gear
Fig. 4-198
Guide roller
Pulley
Pin
Fig. 4-199
Seal
E-ring
Bushing
Fig. 4-200
4 - 71
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4