Oki ES9160 Maintenance Manual page 147

(5) Remove the pulley, one-way clutch and 3 E-
rings. Then take off the pickup roller.
4.5.9 Drawer feed clutch (CLT4/CLT5)
(1) Take off the drawer feeding unit
( P. 4-29 "4.5.2 Drawer feeding unit").
(2) Remove 2 screws and take off the clutch
plate.
(3) Disconnect 1 connector and take off the
upper/lower drawer feed clutch and bushing.
Notes:
Match the rotation stopper of the clutch with
the position shown in the figure for
assembling.
© 2012 OKI DATA CORPORATION All rights reserved
E-ring
Pickup roller
Fig. 4-88
Clutch plate
Fig. 4-89
Drawer feed clutch
Fig. 4-90
4 - 33
One-way clutch
Pulley
E-ring
Bushing
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4