Advertisement
4.11.3
ADU exit sensor (S10)
(1)
Take off the ADU.
(
P. 4-97 "4.11.1 Automatic Duplexing Unit
(ADU)").
(2)
Remove 4 screws and take off the 2
brackets.
(3)
Take off the transfer unit.
(4)
Disconnect 1 connector, remove 2 screws
and take off the bypass feed unit.
(5)
Remove 4 screws and the take off the ADU
lower guide.
© 2012 OKI DATA CORPORATION All rights reserved
Transfer unit
Bracket
Fig. 4-276
Bypass feed unit
Fig. 4-277
ADU lower
guide
Fig. 4-278
4 - 99
Bracket
Connector
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4
Advertisement
