Oki ES9160 Maintenance Manual page 140

4.3.11 Platen sensor (S6) / Carriage home position sensor (S7)
(1) Take off the upper rear cover.
P. 4-4 "4.1.7 Upper rear cover"
(2) Disconnect 1 connector. Release the latches
and take off the platen sensor.
(3) Remove the seal on the carriage home
position sensor.
(4) Disconnect 1 connector. Release the latches
and take off the carriage home position
sensor.
4.3.12 SLG board (SLG)
(1) Take off the lens cover.
P. 4-13 "4.3.2 Lens cover"
(2) Disconnect 7 connectors, remove 4 screws
and take off the SLG board.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Platen sensor
SLG board
© 2012 OKI DATA CORPORATION All rights reserved
4 - 26
Seal
Carriage home
position sensor
Fig. 4-69
Fig. 4-70