Advertisement
(4)
Disconnect 1 connector and then take off the
low-speed clutch.
Notes:
Match the rotation stopper of the clutch with
the position shown in the figure for
assembling.
(5)
Remove 1 bushing and gear.
(6)
Disconnect 1 connector and then take off the
Hi-speed clutch.
Notes:
Match the rotation stopper of the clutch with
the position shown in the figure for
assembling.
4.5.28
Lower drawer detection switch (SW7)
(1)
Pull out the lower drawer.
(2)
Take off the rear cover.
P. 4-3 "4.1.6 Rear cover"
(3)
Remove 2 screws and then take off the
bracket.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Low-speed clutch
Fig. 4-126
Hi-speed clutch
Gear
Bushnig
Fig. 4-127
Bracket
Fig. 4-128
© 2012 OKI DATA CORPORATION All rights reserved
4 - 46
Advertisement
