Advertisement
Notes:
•
"-" means "Not acceptable".
•
The bridge unit (KN-2520) is necessary for installation of the finisher (MJ-1033, MJ-1101, MJ-
1106).
•
The finisher (MJ-1101/1106) is necessary for installation of the hole punch unit (MJ-6103N/E/
F/S).
•
The finisher (MJ-1032) is necessary for installation of the hole punch unit (MJ-6007N/E/F/S).
•
The finisher (MJ-1033) is necessary for installation of the hole punch unit (MJ-6008N/E/F/S).
•
The antenna (GN-3010) is necessary to enable the wireless LAN Module (GN-1060) and
Bluetooth module (GN-2020).
•
Only one Antenna (GN-3010) can be installed in the Bluetooth Module (GN-2020), while up to
two can be installed in the Wireless LAN Module (GN-1060).
ES9160 MFP / ES9170 MFP
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
© 2012 OKI DATA CORPORATION All rights reserved
2 - 12
Advertisement
