Advertisement
(4)
Remove 2 bushings and take off the roller
unit by sliding it.
(5)
Remove 2 E-rings, 3 bushings and 1 gear,
and take off the exit roller by sliding it to the
direction of the arrow.
Notes:
Be careful in taking off the roller because 2
rollers and 2 springs on the lower part of the
exit roller come off.
4.10.6
Reverse motor (M14)
(1)
Take off the reverse unit.
(
P. 4-88 "4.10.1 Reverse unit")
(2)
Release the harness from the harness
clamp.
(3)
Disconnect 1 connector and remove 3
screws, and take off the motor unit.
Notes:
When installing the reverse motor, make
sure to put on the timing belt.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Bushing
Fig. 4-258
Bushing
E-ring
Spring
Rollers
Spring
Fig. 4-259
Timing belt
Connector
Fig. 4-260
© 2012 OKI DATA CORPORATION All rights reserved
4 - 92
Roller unit
Bushing
Exit roller
Bushing
Gear
E-ring
Bushing
Harness clamp
Motor unit
Advertisement
