9.2.9
Procedures when replacing EEPROM
A procedure for replacing the EEPROM is shown below.
[A] Replace EEPROM
(1)
Confirm that the main power switch is turned OFF.
(2)
Replace the EEPROM.
(3)
Start up with the Setting mode (08).
(4)
Copy the data in the SRAM to the EEPROM (08-4581).
(5)
Turn the power OFF.
ES9160 MFP / ES9170 MFP
REPLACEMANT OF HDD/PC BOARDS
Start
[A] Replace EEPROM
Settings completed
Fig. 9-18
© 2012 OKI DATA CORPORATION All rights reserved
9 - 26