Advertisement
(9)
Take off the mixer-1.
(10) Remove the bushing on the rear side.
(11) Remove the oil seal.
(Replacement of Oil Seal:
Replacement of oil seal")
4.8.10
Replacement of oil seal
(1)
Insert a fine screwdriver into the depression
of the oil seal to take it out.
(2)
Push in a new oil seal parallel to the frame or
bushing (shown figure at right).
(3)
Apply the grease (Alvania No.2; amount of 2
rice grains) on entire surface of the oil seal
evenly.
Notes:
Wipe off the excessive grease.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
P. 4-74 "4.8.10
Bushing
4 - 74
Mixer-1
Fig. 4-208
Oil seal
Fig. 4-209
Inside
Outside
Grease
Fig. 4-210
© 2012 OKI DATA CORPORATION All rights reserved
Oil seal
Advertisement
