Oki ES9160 Maintenance Manual page 342

6.6.2 Density adjustment
Adjusts the center density and the variation of density adjustment buttons.
Original mode
Color
Text
Mode
Text
/Photo
Color 8339 8340
- 8344
- 8348
Black
Original mode
Text/
Text Photo
Photo
7444 7445 7446
7456 7457 7458
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value (acceptable values: 0 to 255).
(To correct a value once keyed in, press the [CLEAR] button.)
(4) Press the [OK] or [INTERRUPT] button to store the value in memory.
back to the ready state.
(5) Turn the power OFF and then back ON. Then perform scanning.
(6) If the desired image quality has not been attained, repeat step (1) to (5).
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
User
Photo
custom
8341 8380 Manual density
center value
8345 8381 Manual density
light step value
8349 8382 Manual density
dark step value
Gray Item to be
Scale adjusted
User
custom
7475 7447 Manual density
center value
7478 7459 Automatic density
6 - 34
Item to be
Remarks
adjusted
The larger the value is, the
darker the image becomes.
Acceptable values: 0 to 255
(Default: 128)
Sets the changing amount by
1 step at the density
adjustment on the control
panel.
The larger the value is, the
lighter the light side becomes.
Acceptable values: 0 to 255
(Default: 20)
Sets the changing amount by
1 step at the density
adjustment on the control
panel.
The larger the value is, the
darker the dark side becomes.
Acceptable values: 0 to 255
(Default: 20)
The larger the value is, the darker the image
becomes.
Acceptable values: 0 to 255
(Default: 128)
© 2012 OKI DATA CORPORATION All rights reserved
<Adjustment Mode (05)>
<Adjustment Mode (05)>
Remarks
The equipment goes