Advertisement
(8)
Install the right-hand hinge screw at the rear
side.
(9)
Loosen the hinge screws at the front side.
(10) Place the platen sheet on the original glass
and align it to the top left corner.
Close the RADF gently and open it to check
if the platen sheet is attached properly.
© 2012 OKI DATA CORPORATION All rights reserved
Fig.6-73
Fig.6-74
Fig.6-75
6 - 69
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6
Advertisement
