Advertisement
(4)
Take off 2 guide rollers. Then remove 1 E-
ring and 1 gear.
4.5.31
Registration roller (metal)
(1)
Take off the process unit
P. 4-52 "4.7.1 Process unit"
(2)
Take off the automatic duplexing unit.
P. 4-97 "4.11.1 Automatic Duplexing Unit
(ADU)"
(3)
Take off the registration roller clutch.
P. 4-43 "4.5.24 Registration roller clutch
(CLT2)"
(4)
Remove 1 clip on the rear side.
(5)
Take off the registration roller (metal) by
sliding it to the rear side and pulling it out
toward you.
© 2012 OKI DATA CORPORATION All rights reserved
Pin
E-ring
Gear
Washer
Fig. 4-135
Fig. 4-136
Registration roller (metal)
Fig. 4-137
4 - 49
Washer
Clip
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4
Advertisement
