(4)
Position the pins with the holes on the RADF
by moving it so that the pins fit into the holes
when the RADF is closed.
(5)
Tighten the left-hand hinge screw at the rear
side.
(6)
Loosen the hole position adjustment screws
on the right hand side.
(7)
Match the screw hole positions.
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
© 2012 OKI DATA CORPORATION All rights reserved
6 - 68
Fig.6-69
Fig.6-70
Fig.6-71
Fig.6-72