Oki ES9160 Maintenance Manual page 144

4.5.3 Tray-up sensor (S16/S19)
(1) Take off the drawer feeding unit
( P. 4-29 "4.5.2 Drawer feeding unit").
(2) Disconnect the connector and release the 3
latches to take off the tray-up sensor.
4.5.4 Empty sensor (S17/S20)
(1) Take off the drawer feeding unit
( P. 4-29 "4.5.2 Drawer feeding unit").
(2) Remove 1 screw and then slide the guide
slightly.
(3) Disconnect 1 connector and then take off the
upper/lower drawer empty sensor by
releasing 3 latches.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Guide
Empty sensor
© 2012 OKI DATA CORPORATION All rights reserved
4 - 30
Tray-up sensor
Fig. 4-79
Fig. 4-80
Fig. 4-81