Oki ES9160 Maintenance Manual page 203

(6) Disconnect 1 connecter and remove 2
screws, and take off the reverse unit.
Notes:
Be sure to perform Step (2) before removing
the reverse unit.
Notes:
When installing the reverse unit, engage the
arm of the offset gate motor at the front of the
reverse unit and the holder of the paper exit
unit.
4.10.2 Paper exit unit
(1) Take off the reverse unit
( P. 4-88 "4.10.1 Reverse unit")
(2) Disconnect 1 connecter and remove 2
screws, and take off the paper exit unit.
© 2012 OKI DATA CORPORATION All rights reserved
Fig. 4-249
Fig. 4-250
Paper exit unit
Fig. 4-251
4 - 89
Reverse unit
Connector
Arm
Holder
Connector
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4