Advertisement
Check item
Assist arm motor (M10)
Finisher control board
Replace parts
Assist arm motor
Finisher control board
[CB30] Movable tray shift motor abnormality
MJ-1101
Classification
Finisher related service call
Check Item
Movable tray
Movable tray shift motor (M7)
Movable tray position A, B, and C
sensors (S13, S14, and S15)
Replacement part
Movable tray shift motor (M7)
Movable tray position A, B, and C
sensors (S13, S14, and S15)
Finisher controller PC board
MJ-1106
Check item
Movable tray
Movable tray shift motor (M12)
Movable tray position A, B, and C
sensors (S13, S14, and S15)
Parts to be replaced
Movable tray shift motor (M7)
Movable tray position A, B, and C
sensors (S13, S14, and S15)
Finisher controller PC board
© 2012 OKI DATA CORPORATION All rights reserved
•
Motor check
•
Connector check
•
Harness check
•
Connector check (CN13)
•
Board check
Movable tray shift motor abnormality: The movable tray shift
motor is not rotating or the movable tray is not moving normally.
If there is mechanical problem when the movable tray is moved,
fix the mechanism.
Check the connectors and harnesses between the movable tray
shift motor (M7) and the finisher control PC board (CN8).
•
Connector check
•
Sensor check
Measures
If there is mechanical problem when the movable tray is moved,
fix the mechanism.
Check the connectors and harnesses between the movable tray
shift motor (M12) and the finisher control PC board (CN16).
•
Connector check
•
Sensor check
Remark
8 - 143
Measures
Remarks
Contents
Measure
Measure
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
8
Advertisement
