Oki ES9160 Maintenance Manual page 212

Notes:
After removing the ADU, attach the fixing
band to the holder as shown in the figure.
4.11.2 ADU entrance sensor (S11)
(1) Take off the ADU.
( P. 4-97 "4.11.1 Automatic Duplexing Unit
(ADU)")
(2) Remove 4 screws, disconnect 1 connector,
and then take off the ADU upper guide.
(3) Release the latches and take off the ADU
entrance sensor.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Fixing band
Fig. 4-273
Fig. 4-274
Fig. 4-275
© 2012 OKI DATA CORPORATION All rights reserved
4 - 98
Connector
ADU upper guide
ADU
entrance
sensor