Oki ES9160 Maintenance Manual page 560

Check item
RADF jam access cover
RADF jam access cover switch •
RADF board
Parts to be replaced
RADF jam access cover switch
RADF board
[E870] RADF open jam
Classification
RADF jam
Check item
RADF
RADF opening/closing sensor
RADF board
Parts to be replaced
RADF opening/closing sensor
RADF board
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
Measures
Close the RADF jam access cover if it is opened. Remove if there is
any original before closing it.
Sensor check
(Perform the input check: 03-[FAX] ON[7]/[C])
• Connector check (CN8)
• Harness check
• Board check
• Connector check (CN8)
• Harness check
Remark
RADF open jam
Close the RADF if it is opened. Remove if there is any original
before closing it.
• Sensor check
(Perform the input check: 03-[FAX] ON[7]/[D])
• Connector check (CN75)
• Harness check
• Board check
• Connector check (CN75)
• Harness check
Is the RADF opening/closing sensor adjusted within the specified
range?
8 - 80
Error content
Measures
Remark
© 2012 OKI DATA CORPORATION All rights reserved