Advertisement
6.13 Adjustment of the RADF
6.13.1
Adjustment of RADF position
Perform this adjustment when the RADF is not installed in the correct position.
Notes:
Check if the image adjustment for the equipment is performed properly before this adjustment of
the RADF.
[A] Checking
(1)
Open the RADF and install 2 positioning pins
(the positioning pins are installed to the back
side of the hinge which is on the left side of
the RADF).
(2)
Remove the platen sheet.
(3)
Close the RADF and check if the positioning
pins fit the holes on the RADF.
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
© 2012 OKI DATA CORPORATION All rights reserved
6 - 66
Fig.6-63
Fig.6-64
Fig.6-65
Advertisement
