Advertisement
4.9.10
Installation of the fuser unit fuse (service part)
(1)
Take off the fuser unit
(
P. 4-75 "4.9.1 Fuser unit").
(2)
Remove 1 screw and take off the rear cover
[1].
(3)
Disconnect 1 connector [2].
Notes:
•
When installing the rear cover [1], make
sure that the harness is not caught.
•
Install the rear cover [1] with the ground
leaf spring [3] outside of it as shown in the
right-hand figure.
(4)
Connect the connectors of the fuser unit
fuse.
© 2012 OKI DATA CORPORATION All rights reserved
[2]
Fig. 4-244
Connector
Fig. 4-245
4 - 87
[1]
[3]
[3]
Fuser unit fuse
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4
Advertisement
