Advertisement
5.5
Test Print Mode (Test Mode 04)
The embedded test pattern can be printed out by keying in the following codes in the test print mode
(04).
Operation procedure
[0][4]
(Code)
[POWER]
Notes:
1. When an error occurs, it is indicated on the panel, but the recovery operation is not
performed. Turn OFF the power and then back ON to clear the error.
2. During test printing, the [CLEAR] button is disabled when "Wait adding toner" is displayed.
ES9160 MFP / ES9170 MFP
SELF-DIAGNOSIS MODES
[START]
Operation
Continuous
Test Printing
5 - 10
[CLEAR]
[POWER] OFF/ON
(Exit)
© 2012 OKI DATA CORPORATION All rights reserved
Advertisement
