Oki ES9160 Maintenance Manual page 134

(7) Disconnect the connector of the lamp
harness from the LED board [1].
Notes:
Be careful not to apply load to the LED board
when disconnecting the connector.
See the following chapter for the installation
procedure.
P. 4-23 "4.3.9 Installing the lamp harness"
(8) Release 1 harness clamp of the carriage and
take off the harness wiring on the rear frame.
(9) Release the harness from the harness
holder.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Clamp
© 2012 OKI DATA CORPORATION All rights reserved
4 - 20
[1]
Fig. 4-53
Fig. 4-54
Fig. 4-55