Advertisement
(9)
Slide the RADF backward and take it off by
lifting it up.
4.12.2
KD-1025 (Paper Feed Pedestal (PFP))
(1)
Turn the power OFF and unplug the power
cable.
(2)
Remove 1 screw and take off the connector
cover.
(3)
Remove 1 screw and the ground wire, and
then disconnect 2 connectors (3 connectors
if the optional damp heater is installed).
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Connector cover
© 2012 OKI DATA CORPORATION All rights reserved
4 - 108
Fig. 4-305
Fig. 4-306
Fig. 4-307
Advertisement
