Advertisement
3.5.2
Description of Operation
[ 1 ] Warming-up
1. Initialization
Power ON
→ Heater lamp ON
→ Set number "1" reproduction ratio "100%" and "WAIT WARMING UP" are displayed
→ Fan motors ON
→ Initialization of scanning system
-
The carriage moves to the home position.
-
The carriage moves to the peak detection position.
-
The exposure lamp is turned ON.
-
Peak detection (white color is detected by the shading correction plate)
-
The exposure lamp is turned OFF.
→ "READY (WARMING UP)" is displayed
2. Pre-running operation
The pre-running operation is started when the temperature of the fuser roller surface reaches a
certain temperature.
→ The main motor is turned ON.
-
Fuser roller rotated
-
Drum rotated
→ Initialization of feeding system
-
Each drawer tray goes up.
→ Pre-running operation stops after three seconds.
3. When the surface temperature of the fuser roller becomes sufficient for fusing,
→ "READY" is displayed.
[ 2 ] Ready state (ready for copying)
Buttons on the control panel enabled
→ When no button is pressed for a certain period of time,
- Set number "1" and reproduction ratio "100%" are displayed. Equipment returns to the normal
ready state.
© 2012 OKI DATA CORPORATION All rights reserved
3 - 19
ES9160 MFP / ES9170 MFP
OUTLINE OF THE MACHINE
3
Advertisement
