Oki ES9160 Maintenance Manual page 402

B4-size recycled paper mode
Step Buttons
1 Button1
2 Button2
3 Button1
4 Button2
Notes:
To change settings from the B4-size recycled paper mode to the normal mode, perform steps (1)
through (4), and then press [Button1] and [Button2] on the control panel as shown below to set
the normal mode.
Normal mode
Step Buttons
1 Button1
2 Button2
3 Button1
4 Button2
(6) When the settings are stored normally, [LED1] on the control panel is lit. [LED1] blinks, if an error
occurs. In this case, turn the power OFF and make the settings again from step (4).
(7) Turn OFF the power of the equipment.
(8) Turn OFF all bits of the SW1 on the Finisher control board.
(9) Install the board access cover.
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
Number of pressing
1
1
8
1
Number of pressing
1
1
6
1
6 - 94
Remarks
Confirms the input value
Confirms the input value
Remarks
Confirms the input value
Confirms the input value
© 2012 OKI DATA CORPORATION All rights reserved