Advertisement
[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1)
Remove the right-hand hinge screw at the
rear side.
(2)
Loosen the left-hand hinge screw at the rear
side.
(3)
Loosen the hinge screws at the front side.
© 2012 OKI DATA CORPORATION All rights reserved
Fig.6-66
Fig.6-67
Fig.6-68
6 - 67
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6
Advertisement
