Advertisement
(34) Fix the harness with 1 clamp, and then insert
the connector into the hole of the frame of
the equipment.
(35) Attach the harness to the connector of the
switching regulator.
(36) Run the harness through the hole of the
frame of the equipment, and then wire it to
the rear side.
(37) Attach the harness to the clamp.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
© 2012 OKI DATA CORPORATION All rights reserved
4 - 136
Fig. 4-387
Switching regulator
Fig. 4-388
Clamp
Fig. 4-389
Advertisement
