Oki ES9160 Maintenance Manual page 137

4.3.9 Installing the lamp harness
(1) Install the harness to 2 harness clamps and
wire it under carriage-2.
(2) Rotate the drive pulley and move the
carriage-1 to the left side.
(3) Install the harness in the harness guide and
wire it to the rear side of the equipment.
© 2012 OKI DATA CORPORATION All rights reserved
Fig. 4-61
Fig. 4-62
Fig. 4-63
4 - 23
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4