11.5.3
Finisher firmware (MJ-1032)
(1)
Install the ROM [2] in the download jig (K-PWA-DLM-320) [1].
Make sure that the type of the ROM and installation direction are correct.
(2)
Turn OFF the power of the equipment. Then slide the Finisher and pull it out from the equipment.
(3)
Remove 1 screw [6] and take off the download cover [7].
[6]
© 2012 OKI DATA CORPORATION All rights reserved
[7]
Fig.11-38
11 - 43
ES9160 MFP / ES9170 MFP
FIRMWARE UPDATING
11