Advertisement
6.3.4
Scanner related adjustment
[A] Image distortion
A
Step 1
C
Step 2
<Procedure>
(1)
While pressing [0] and [5] simultaneously,
turn the power ON.
(2)
Press [FAX] next [START] to make a copy of
any image on a sheet of A3/LD paper.
(3)
Key in [3033] and press the [START] button
to move the carriage to the adjustment
position.
(4)
Make an adjustment in the order of step 1
and 2.
•
Step 1
-
In case of A:
Tighten the mirror-3 adjustment screw
(CW).
-
In case of B:
Loosen the mirror-3 adjustment screw
(CCW).
•
Step 2
-
In case of C:
Tighten the mirror-1 adjustment screw
(CW).
-
In case of D:
Loosen the mirror-1 adjustment screw
(CCW).
(5)
Apply the screw locking agents to the
adjustment screws. (2 areas)
•
Recommended screw lock agent
Manufacturer: Three Bond
Product name: 1401E
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
Feeding direction
Feeding direction
Fig.6-10
Adjustment screw for the mirror-3 (Rear)
Adjustment screw
for the mirror-1 (Rear)
© 2012 OKI DATA CORPORATION All rights reserved
6 - 14
B
D
Carriage-2
Fig.6-11
Carriage-1
Fig.6-12
Advertisement
