6.14.4
Punch hole position adjustment
This adjustment is performed in the Adjustment Mode (05-4825) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
0.2mm
-4.0 mm to 1.0 mm
Increasing the value
The distance between the punch hole and the
trailing edge of the paper becomes shorter.
Decreasing the value The distance between the punch hole and the
trailing edge of the paper becomes longer.
6 - 82
© 2012 OKI DATA CORPORATION All rights reserved